
We don't test our own material.
Every compound BioLongevity Labs sells is tested by a third-party laboratory before it ships. The certificate is published for anyone to read, and you can check it against the lab’s own records.
From batch to bench, in six steps.
Every compound is tested by a third-party laboratory before it ships. Here is the order it happens in.
Step 1
Made
Manufactured in U.S. GMP facilities in Cleveland, Ohio, with documented chain of custody records.
Step 2
Sent out
Samples go to independent analytical laboratories. BioLongevity Labs does not test its own material.
Step 3
Tested
The lab reports identity, purity, quantity, appearance and endotoxin, and signs the certificate.
Step 4
Labelled
Every batch passes nine checkpoints before it is labelled. Each vial carries a QR code.
Step 5
Published
The certificate goes into the COA library, open with no account. Older certificates stay up.
Step 6
Verified by you
The code on the certificate resolves on the issuing lab's own site.
What the lab measures.
Endotoxin results appear on the certificate or as a separate report, depending on the lab.
| Report | Method | What it confirms |
|---|---|---|
| Identity | Mass spectrometry | Measured molecular weight matches the target sequence |
| Purity | LC-MS or UHPLC-MS | Percentage of target compound relative to related substances |
| Quantity | Liquid chromatography against a calibration curve | Amount in the vial compared with the labelled quantity |
| Appearance | Visual inspection | Physical form and color match the compound |
| Endotoxin | LAL or recombinant Factor C (rFC), depending on the lab | Endotoxin content against the printed limit |
Three independent labs. One standard.
None of them sits inside our production chain, and each puts its own name and signature to the results.

SafeCert Labs
A CLIA lab.
Each certificate names its signing analyst or operations manager.
BioRegen
Independent third-party testing.
Verify with the COA number and security key at bioregen.com/verify(opens in a new tab)
AV Analytics
Endotoxin testing by rFC assay. AV Analytics performs all new testing; each older COA names the lab that tested that batch.
Verify with the search code at avanalytical.com/coa-search(opens in a new tab)
How to read a COA.
The product page states a minimum specification. The certificate shows what the lab measured.
- Specification
- 99%
- Result
- 99.6%
- Verdict
- Conforms
- Conforms
- Meets the specification.
- Over-conforming
- Above the specification. Most common on quantity.
- Pass
- Endotoxin, measured against a ceiling.
- Purity percentage
- The product page states a minimum specification; the certificate shows the measured result. Example: a 99% specification with a 99.6% result.
- Determined content
- Measured quantity in milligrams against the label. Results normally sit at or above the label, an allowance for handling and transfer loss.
- Chromatogram
- The main peak is the target compound; its position and area determine the purity figure. Smaller peaks are related substances.
- Identifiers
- Molecular formula, theoretical molecular weight, CAS number and PubChem CID may be printed. Salt forms such as acetate read higher than the free base, which is expected.
- Test dates
- When the sample arrived at the lab and when analysis was reported. These are the figures to cite in a methods section.
- Signature
- Each certificate names a signing analyst or operations manager with a direct email address.
Check it with the lab yourself.
Most certificates carry their own QR code, which opens the issuing lab’s verification page.
AV Analytics: enter the search code at avanalytical.com/coa-search.
BioRegen: enter the COA number and security key at bioregen.com/verify.
If a number does not resolve, email help@biolongevitylabs.com and we will investigate.
Open the product page for the compound you want to check. The QR code on each vial links to this page.
Find the latest certificate of analysis (COA). No account is required to view it.
Note the lab name and the verification code printed on the certificate.
Enter the code on the lab's verification page, or scan the QR code on the certificate to open it.
Compare the lab's record with the certificate on our site.
Independent rating
96/100
Merit Verified, rated Strong
“Merit Verified gives BioLongevity Labs a Merit Score of 96 out of 100, rated Strong. The score draws on 249 independent COAs from three labs across 47 peptides, with evidence last updated in May 2026.”
Every certificate, in one library.
Filter by compound, open the certificate full size, then save, print or forward it.
For laboratory research use only. Not for human or animal consumption. Not intended to diagnose, treat, cure, or prevent any disease.
